5 Installation Procedure
22 YASKAWA TOEP C730600 97C LCD Keypad Installation Manual
2. Use M3 screws (6 mm (0.24 in) depth cross-recessed pan
head screws) to attach the keypad from the inside as
shown in Figure 5.5.
A - Keypad
B - M3 screws
C - Enclosure panel
D - Screw mounting
hole
Figure 5.5 External/Face-Mount Installation
3. Push the tab on the top of the drive keypad and carefully
pull forward to remove the keypad from the drive.
Figure 5.6 Removing the Included Drive Keypad
To Next Page
Loading...