6 Keypad Operation
YASKAWA TOEP C730600 97C LCD Keypad Installation Manual 53
7. Push or to select the specified digit, then
push or to select the correct number.
• Push [Default] to set the parameter to factory
default.
• Push [Min/Max] to show the minimum value or
the maximum value on the display.
8. Push to keep the changes.
9. Continue to change parameters, then push
[Back], [Home] to go back to the home screen
after you change all the applicable parameters.
◆ Save a Backup of Parameters
You can save a backup of the drive parameters to the keypad. The
keypad can store parameter setting values for a maximum of four
drives in different storage areas. Parameter setting backups can
save time when you set parameters after you replace a drive. If you
To Next Page
Loading...