YASKAWA JVOP-KPLCA04A Series - Page 54

6 Keypad Operation
54 YASKAWA TOEP C730600 97C LCD Keypad Installation Manual
set up more than one drive, you can copy the parameter settings
from a drive that completed a test run to the other drives.
Note:
• Stop the motor before you back up parameters.
• While you back up parameters, the drive will not accept Run commands.
• The DriveWorksEZ PC software password is necessary to back up qx-xx
[DriveWorksEZ Parameters] and rx-xx [DWEZ Connection Parameters]. If you
enter an incorrect password, the drive detects PWEr [DWEZ Password
Missmatch].
1. Push (Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper
right-hand corner of the screen.
• If the screen does not show [Home] for , push (Back),
and then push to show [Home].
2. Push (Menu).