YASKAWA JVOP-KPLCA04A Series - Delete Parameters Backed up to the Keypad

6 Keypad Operation
62 YASKAWA TOEP C730600 97C LCD Keypad Installation Manual
Note:
The keypad shows vFyE [Parameters do not Match] when the parameter settings
backed up in the keypad do not agree with the parameter settings copied to the
drive. Push one of the keys to return to the screen in Step 6.
◆ Delete Parameters Backed Up to the Keypad
This procedure deletes the parameters that you backed up to the
keypad.
1. Push (Home) to show the HOME screen.
Note:
• When the drive is in HOME Mode, the screen shows [Home] in the upper
right-hand corner of the screen.
• If the screen does not show [Home] for , push (Back),
and then push to show [Home].
2. Push (Menu).
3. Push or to select [Parameter Backup/
Restore], then push .