4 Keypad: Names and Functions
YASKAWA TOEP C730600 97C LCD Keypad Installation Manual 15
LED Display Drive Status
ALM LED
Illuminated The drive detects a fault.
Flashing
The drive detected one of the following:
• An alarm
• An oPE parameter setting error
• A fault or error during Auto-Tuning
Note:
The digital characters displayed on the keypad
will also flash.
OFF
There are no drive faults or alarms.
LO/RE LED Illuminated
The keypad controls the Run command (LOCAL
Mode).
OFF
The control circuit terminal or serial transmission
device controls the Run command (REMOTE Mode).
■ LED Flashing Statuses
Refer to Figure 4.2 for information about the differences between
flashing and “flashing quickly”.
Figure 4.2 LED Flashing Statuses
Figure 4.3 Relation between RUN indicator and Drive Operation
To Next Page
Loading...