5 Installation Procedure
24 YASKAWA TOEP C730600 97C LCD Keypad Installation Manual
5. Use the extension cable to connect the drive to the
keypad.
A - Extension cable
B - Communications
connector
C - Drive
D - Keypad
E - Cable connector
Figure 5.8 Connecting the Drive and Keypad with the Extension
Cable
Internal/Flush-Mount Installation
Installation support sets A or B (sold separately) are necessary for
Internal/Flush-Mount installation. The installation procedure is the
same for installation support sets A and B. Contact Yaskawa or
your nearest sales representative to order optional items.
1. Use the dimensions in Table 5.3 and Figure 5.9 to cut an
opening and tap two holes in the enclosure panel.
The panel cut-out dimensions are the same for installation
support sets A and B.
To Next Page
Loading...