YASKAWA MH SIGMA-5 Series - Page 14

1 Introduction
1.3 System Layout
1-5
162068-1CD
162068-1CD
MH-SERIES
POSITIONER
1.3.1.2 Headstock Assembly
The Headstock Assembly integrates the drive assembly with a column
that is designed to be floor-mounted or mounted to a machine base, as
required for use in cantilevered (stand-alone) applications. The standard
configuration provides connectors in the column for motor control and
safety circuits. Leveling bolts are included. The user must provide suitable
anchor bolts.
Fig. 1-4: Headstock Assembly
14/101