YASKAWA MH SIGMA-5 Series - MotoMount System

3-5
162068-1CD
162068-1CD
MH-SERIES
POSITIONER
3 Equipment Description
3.4 * MotoMount™
3.4 *MotoMount™
MotoMount (see Fig. 3-8) is a flexible tool fixture mounting system which
improves tool repeatability and reduces loads on the headstock/tailstock
bearing systems. MotoMount accommodates combined headstock/
tailstock/tooling misalignment up to two degrees.
MotoMount is required for use with all Motoman MHT-series (headstock/
tailstock) positioners. The MotoMount drive components are mounted
onto the headstock faceplate, while the tailstock components replace
earlier tailstock designs.
MotoMount is also available in a Heavy Duty (HD) configuration (see
Figure 3-9). MotoMount HD is used on the1605/3105 drive assemblies.
MH95/MH185/MH505 drive assemblies use the standard MotoMount.
CAUTION
Do not use MotoMount with stand-alone (no tailstock) applications. Use
in a stand-alone application will result in uncontrollable tooling fixture
motion.
25/101