YASKAWA P1000 Safety Precautions

i.10 Revision History
The revision dates and the numbers of the revised manuals appear on the bottom of the back cover.
MANUAL NO.
Example:
TOEP YAIP1U 03B
Published in U.S.A. January 2014 13-5
Date of
publication
Date of
original publication
Revision number
2
Date of Publication
Revision
Number
Section Revised Content
January 2014 3 All
Added support for models 4A0930 and 4A1200. Added sections for Keypad
Operation, Start-up, Parameter Table, and Troubleshooting. Removed
Parameter Setting Reference Table.
July 2013 2
Electrical
Installation/
Standards
Compliance
Content arrangement of this text: To maintain UL/cUL approval, UL Listed
closed-loop crimp terminals are specifically required when wiring the drive
main circuit terminals on models 2A0110 to 2A0415, 4A0058 to 4A0675,
(4A1200 series-dependent), and 5A0041 to 5A0242.
June 2013 1 i.5 Figure i.9
May 2013 – – First Edition
i.10 Revision History
72
YASKAWA ELECTRIC TOEP YAIP1U 03B YASKAWA AC Drive – P1000 Safety Precautions

YASKAWA P1000 Specifications

General

Operating Temperature	-10°C to +50°C (14°F to 122°F)
Cooling Method	Fan Cooled
Output Voltage	0-Input Voltage
Output Frequency	0-400 Hz
Frequency Range	0.1-400 Hz
Power Rating	0.4 kW to 630 kW
Control Method	V/f Control
Overload Capacity	150% for 60 seconds
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Short Circuit, Ground Fault
Protection Features	Electronic Thermal Overload Protection
Communication	Modbus RTU
Communication Interface	RS-485
Humidity	5% to 95% (non-condensing)
Altitude	Up to 1000m (3280ft) without derating
Enclosure Rating	IP20