To Next PageTo Next Page
Need help?Do you have a question about the YASKAWA P1000 Series and is the answer not in the manual?
General| Series | P1000 |
|---|---|
| Voltage Classes | 200 V, 400 V, 600 V |
| Frequency | 50/60 Hz |
| Humidity | 95% RH or less (non-condensing) |
| Type | AC Drive |
| Control Method | V/f Control |
| Ambient Temperature | -10 to +50°C (14 to 122°F) |
| Communication Options | Modbus RTU |
| Protection Features | Overvoltage, Undervoltage |
| Overload Capacity | 150% for 60 seconds |
| Storage Temperature | -20°C to +60°C (-4 to 140°F) |
| Cooling Method | Fan cooled |
| Horsepower Range | 0.5 to 500 HP |
Provides general safety precautions and warning conventions.
Procedure to verify drive model and inspect for damage upon receipt.
Specifies environmental conditions required for optimal drive performance and longevity.
Illustrates the standard wiring diagram for connecting the drive and peripherals.
Shows different terminal arrangements for various drive capacities.
Procedures and precautions for safely wiring the main circuit of the drive.
Guidelines for selecting wire gauges and proper tightening torques for connections.
Checklist of items to review before applying power to the drive.
Describes different methods for resetting faults after they occur.
Details power ratings, input/output current, and voltage for specific drive models.
Details power ratings, input/output current, and voltage for specific drive models.
Describes various protection features like motor, overload, and overvoltage protection.
Yaskawa's recommended branch circuit protection using specific fuses.
Information on the drive's suitability for circuits with specific short circuit current ratings.
How to enable and configure the internal motor overload protection feature.
Parameter for setting the motor's rated current to enable overload protection.
Parameter to select the motor overload curve based on motor type.
