8 Standards Compliance
46 YASKAWA ELECTRIC TOBP C730600 95A U1000-Series Option PS-U10 Installation Manual
Make sure that all connections are correct after installing the drive and connecting
peripheral devices.
Failure to obey can cause damage to the drive.
After blowing a fuse or tripping an Earth Leakage Circuit Breaker (ELCB), wait at
least 5 minutes and make sure that the CHARGE lamp is off before starting the
drive again or operating the peripheral devices.
Check the wiring and peripheral devices to identify the problem. Contact your supplier
before starting the drive or peripheral devices if the cause cannot be identified.
TOBP_C730600_95A_2_0_E.fm 46 ページ ２０２３年２月１３日 月曜日 午後１時８分
To Next Page
Loading...
