8 Standards Compliance
48 YASKAWA ELECTRIC TOBP C730600 95A U1000-Series Option PS-U10 Installation Manual
European Standards
Figure 35
Figure 39 CE Mark
The CE mark identifies products that comply with applicable European Directives for safety
and environmental regulations.
It is required for engaging in business and commerce in Europe.
The applicable European Directives for this product are in the following table.
Yaskawa declared the CE mark based on the harmonized standards in the following table.
The user is responsible to make sure that the end products used with this product comply
with all applicable European directives and other national regulations (if required).
CE Low Voltage Directive Compliance
Yaskawa tested this product according to European standard IEC/EN 61800-5-1:2007. The
product fully complies with the Low Voltage Directive.
Meet the following condition when using this product with other devices to comply with the
Low Voltage Directive:
Area of Use
Do not use the product in areas with pollution degree 3 or 4 or overvoltage category 3 in
accordance with IEC/EN 60664.
Applicable European Directive Applicable Harmonized Standards
Low Voltage Directive (2006/95/EC) IEC/EN 61800-5-1: 2007
EMC Guidelines (2004/108/EC)
EN 61800-3: 2004/A1: 2012
IEC 61800-3: 2004/A1: 2011
TOBP_C730600_95A_2_0_E.fm 48 ページ ２０２３年２月１３日 月曜日 午後１時８分
To Next Page
Loading...
