(9) To discontinue the punch out operation, de-
press the RESET key. However, the dis-
continued operation cannot be resumed.
Go back
to (6) and repeat the operations
all over again.
The format of the punched
out tape is the same as that of the tape
described in 4.4.5, (1),
a
OUT KEY
3 FEET
J
3 FEET
FEED
HOLES
FEED
HOLES
(
P
-. —-----
%
H 01 X TOOL OFFSET DATA
“’” ---------—
(SETTING ANDIOR PARAMETER DATA)
O/., O 01234, G92 XO—
Y
OUT
KEY
3 FEET
(To PUNCH OUT ALL PART PROGRAMS)
Note 3 Feel = 36o characters
1FOOT SPACE ‘SP
1FOOT
, 3 FEET
4
k
CODE PuNCHED
w
FEED
HOLES
FEED
HOLES
p-------- “/.0100
M02, SP 0200
M 30 SP
0500,
M 30, ‘h ----------
[
I
DEPRESS THE CAN KEY AND THE PAPER TAPE PUNCH
IMMEDIATELY BEGINS TO PUNCH SIGNIFICANT DATA
DEPRESS THE CAN KEY AND THE PAPER TAPE
WHICH BEGIN WITH “’O/. “
PUNCH STOPS TO PUNCH SPROCKET PERFORATION
Fig. 4.50 Dataand Program Formats
on Paper Tape
185
To Next Page
Loading...
