Code Causes
835
836
837
838
839
840 CPU ERROR
CPU ERROR (2).
841
842
843
844
845
846
Code
Causes
847
848
849
910
TAPE-MEM ERROR
ME MO RY VERIFYING ERROR
(OFF-LINE).
920
TAPE ERROR
TAPE READING-IN ERROR (OFF-LINE)
ALARM “095”
X-coordinates diffemt between G 71 command cut-
ting start point and last block for finished shape
program.
Z-coordinates different between G 72 command
cutting start point and last block for finished
shape program.
Z-coordinate for cutting start point by G71 com-
mand different from Z-coordinate for the first
block of the finished shape program.
(Command
G71 . . . R1 is excepted. )
X-coordinate for cutting start point by G7Z com-
mand different from X–coordinate for the first
block of the finished shape program.
(Command
G72 . . .
R1 is excepted. )
X-coordinate
G71 . . . R1.
point.
for
finished shape program by
Command exceeding cutting start
A–51
To Next Page
Loading...
