EasyManua.ls Logo

YASKAWA yasnac lx3 - Page 95

YASKAWA yasnac lx3
288 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
(Functions)
1
The commanded characters are directly output
in 1S0 code,
. Alphabets (A to Z)
. Numerals
. Special characters (*, /, +, -)
Can be output.
However,
‘*’is output by
the space code.
2
The value of the variables is regarded as 2-
word data (32 bits) considering the digits
below the decimal point, and is output from
the higher order bytes, directly as binary
data.
The effective digits after the decimal point
are commanded in parentheses after the
variable command.
3
After outputting the command data, the EOB
code is output in ISO code.
(Example)
BPRNT [C ** X #100 [3] Y #101 [3]
M #10 [01;
When the variables are;
#100 = 0.40956
#101 = -1638.4
#10 = 12.34
it is output as;
2 The variable values are output from the
higher order digit, digit-by-digit, for as
many digits as commanded. The decimal point
is also output in 1S0 code.
The variable value is output by commanding
the variable number after l’#il.
Then the
digits before the decimal point, and the digits
after the decimal point are each commanded in
parentheses.
Assume that the variables have a maximum of
8 digits. When the higher order digit is O,
the output follows parameter #6016D7.
[Parameter #6016D7 = 0:
Output space
code.
#6016D7 = 1:
No output. :
When the digits after the decimal point of the
commanded variable is other than O, as many
digits after the decimal point as commanded,
are output.
When the commanded digits after
the decimal point is O, no decimal point is
output .
When the sign is positive, the output of the
space code follows parameter #6016D7.
[Parameter #6016D7 = O:
Output space
code.
#6016D7 = 1:
No output. ]
C3 AO AO D8 01 9A 59 FF E7 Cl) 00 4D OC OA (Hexadecimal)
~~~T~~o~
After outputting the command data, the EOB
I 1 i
~12
Space
Space
‘c’
(b) DPRNT
(Format) DPRWT [ a
#b[c d].. ] ;
T TTT
L
~
Digitsafter
decimal point
Digits before
decimal point
Variable
I
~ Character
(Functions)
1
The commanded characters are directly output
in 1S0 code,
as in the (i) BPRNT command.
code is o~tput in ISO code.
(Example)
DPRNT [X#2[531Y#5[531 T#30[2011;
When;
Variable value #2 = 128.47398
#5 = 91.2
#30 = 123.456
And;
When parameter #6016D7 = O
AO AO AO 61 B2 B8 2E B4 37 B4
I
-x
128.474
~;-”’”2°
D4 AO B2 33 OA
87

Other manuals for YASKAWA yasnac lx3

Related product manuals