YASKAWA Z1000 - Page 38

A
B
C
A – SW1 (ON)
B – Screw (OFF)
C – SW2 (ON)
Figure i.32 EMC Filter Switch Location (2A0075 to 2A0114, 4A0052ooA, and 4A0065 to 4A0096)
A
B
B
C
A – SW1 (ON)
B – Screw (OFF)
C – SW2 (ON)
Figure i.33 EMC Filter Switch Location (4A0124)
A
B
B
C
A – SW1 (ON)
B – Screw (OFF)
C – SW2 (ON)
Figure i.34 EMC Filter Switch Location (2A0143 to 2A0273 and 4A0156 to 4A0240)
A
B
B
C
A – SW1 (ON)
B – Screw (OFF)
C – SW2 (ON)
Figure i.35 EMC Filter Switch Location (4A0302)
If the SW1/SW2 screws are missing, install proper size screws with the proper tightening torque as shown in Table i.19.
NOTICE: Do not use screws of different sizes in SW1 and SW2. Failure to comply may cause overheating.
i.4 Electrical Installation
38
YASKAWA ELECTRIC TOEP C710616 54A YASKAWA AC Drive - Z1000 Quick Start Guide