| Yealink Connect Application | 25
• Update Firmware
• Headset Factory Reset
Change Headset Name
You can change the headset name via the Yealink Connect application.
Procedure
1. Go to Headset Information > Headset Name.
2. Change the headset name.
Disconnect Connected Device
You can choose to disconnect connected devices via the Yealink Connect application.
Procedure
1. Go to Connection Management.
2. Select a connected device.
3. Select OK.
3. (Optional) You can also select a connected device and tap , and then tap Disconnect.
Remove Connected Device
You can choose to remove connected devices from the headset.
Procedure
1. Go to Connection Management.
2. You can also select a connected device and tap .
3. Select Delete the device.
Headset Settings
You can change the basic settings of headset via the Yealink Connect.
Headset Guide
To Next Page
Loading...
