Basic Call Features
93
Group Call Pickup
To enable the group call pickup via web user interface:
1. Click on Features->Call Pickup.
2. Select Enabled from the pull-down list of Group Call Pickup.
3. Click Confirm to accept the change.
To configure the group call pickup code on a global basis via web user interface:
1. Click on Features->Call Pickup.
2. Enter the group call pickup code in the Group Call Pickup Code field.
3. Click Confirm to accept the change.
To configure the group call pickup code on a per-line basis via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced.
To Next Page
Loading...
