Yealink SIP-T29G User Manual

User Guide for the SIP-T29G IP Phone
96
Value (Default/Lock)
Usage: When the phone receives an incoming call, the Line key LED flashes green:
1. Press the Line key to accept the incoming call.
2. Press the Line key to place a new call and the active call is placed on hold.
3. Press the Line key again to resume the held call.
If you select Lock from the Value field, the line keys located in the same position of the other
page will be automatically assigned Line feature with Lock filled in the Value field. This feature
is only applicable to line key 1-9. Then you can use this key on every page. If you select Default
from the Value field, you can only use this key on the current page.
Speed Dial
You can use this key feature to speed up dialing the numbers frequently used or hard to
remember.
Dependencies: Type (Speed Dial)
Account ID (the account this feature will be applied to)
Label (key label displayed on the LCD screen)
Value (the number you want to dial out)
Usage: Press the Speed Dial key to dial out the number specified in the Value field, using the
account selected from the Account ID field.
Voice Mail
You can use this key feature to quickly connect voice mail. For more information, refer to Voice
Mail on page 214.
Dependencies: Type (Key Event)
Key Type (Voice Mail)
Account ID (the account this feature will be applied to)
Label (key label displayed on the LCD screen)
Value (the voice mail access code)
Usage: Press the Voice Mail key to dial out the voice mail access code. Then follow the voice
prompt to listen to the voice mails.
Direct Pickup
You can use this key feature to answer someone else’s incoming call on the phone.
Dependencies: Type (Key Event)
Key Type (DPickup)
Account ID (the account this feature will be applied to)
Label (key label displayed on the LCD screen)
Value (the directed call pickup code followed by the target phone number)
Usage: Press the Direct Pickup key on your phone when the target phone number receives an
incoming call. The call is then answered on your phone.

Yealink SIP-T29G Specifications

General

Speakerphone	Yes
Voice codecs	G.711, G.722, G.723, G.726, G.729ab, iLBC
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Lines quantity	10 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Power over Ethernet (PoE)	-
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800
Volume control	Buttons

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm