User Guide for the SIP-T29G IP Phone
20
Wi-Fi USB Dongle WF40
Note
Phone Installation
If your phone is already installed, proceed to Phone Initialization on page 24.
This section introduces how to install the phone:
1) Attach the stand or the optional wall mount bracket
2) Connect the handset and optional headset
3) Connect the optional USB flash drive
4) Connect the power
1) Attach the stand or the optional wall mount bracket
Desk Mount Method
We recommend that you use the accessories provided or approved by Yealink. The use of
unapproved third-party accessories may result in reduced performance.
To Next Page
Loading...
