User Guide for the SIP-T29G IP Phone
100
Value (the number you want to transfer to)
Usage:
When the transfer mode on DSS key is Blind Transfer, press the Transfer key to complete
the blind transfer to the number specified in the Value field.
When the transfer mode on DSS key is Attended Transfer, press the Transfer key to dial
out the number specified in the Value field, and then perform the attended or
semi-attended transfer.
When the transfer mode on DSS key is New Call, press the Transfer key to place a new call
to the number specified in the Value field.
Note
Hold
You can use this key feature to place an active call on hold or retrieve a held call.
Dependencies:
Type (Key Event)
Key Type (Hold)
Label (key label displayed on the LCD screen)
Usage:
1. Press the Hold key during an active call to place the call on hold.
2. Press the Hold key again to retrieve the held call.
DND
You can use this key feature to enable or disable DND. You can also use this key feature to
access the custom DND screen. For more information, refer to Do Not Disturb (DND) on page
130.
Dependencies:
Type (Key Event)
Key Type (DND)
Label (key label displayed on the LCD screen)
Usage:
When DND is in phone mode:
1. Press the DND key to enable DND.
2. Press the DND key again to disable DND.
Transfer mode via DSS key is configurable via web user interface at the path
Features->Transfer->Transfer Mode Via Dsskey.
If the Value field is left blank, the Transfer key performs the same as the TRAN key or the
Transfer soft key during a call. For more information, refer to Call Transfer on page 143.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
