User Guide for the SIP-T29G IP Phone
144
2. You can do one of the following:
- Enter the number you want to transfer the call to.
Press or the Transfer soft key to complete the transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
- Press the Directory soft key, and then select Local Directory. Select the desired
group and search for the contact (Directory should be configured in advance. Refer to
Directory on page 62 for more information).
Press , or the Send soft key to complete the transfer.
- Press the Directory soft key, and then select History. Select the desired list and then
press or to select the entry (Directory should be configured in advance.
Refer to Directory on page 62 for more information).
Press , or the Send soft key to complete the transfer.
- Press the Directory soft key, and then select Remote Phone Book. Select the desired
group and search for the contact (Directory should be configured in advance. Refer to
Directory on page 62 and Remote Phone Book on page 78 for more information).
Press , or the Send soft key to complete the transfer.
To perform a blind transfer to exist call:
1. Press or the Transfer soft key during a call.
2. Press or to select the desired hold call you want to transfer the call to.
3. Press , or the Transfer soft key to complete the transfer.
To Next Page
Loading...
