Yealink SIP-T29G User Manual

Advanced Phone Features
165
3. Enter the desired pickup code in the Directed Call Pickup Code field.
4. Click Confirm to accept the change.
Configuring Transfer Mode on DSS Key
When there is an active call on the IP phone, you can handle the active call differently
depending on the transfer mode on DSS key.
To configure the transfer mode on DSS key via web user interface:
1. Click on Features->Transfer.
2. Select the desired transfer mode from the pull-down list of Transfer Mode via Dsskey.
 If you select Blind Transfer, press the BLF key to blind transfer the call to the
monitored user.
 If you select Attended Transfer, press the BLF key to dial out the monitored phone
number and then perform an attended or a semi-attended transfer.
 If you select New Call, press the BLF key to place a new call to the monitored user.
3. Click Confirm to accept the change.

Yealink SIP-T29G Specifications

General

Speakerphone	Yes
Voice codecs	G.711, G.722, G.723, G.726, G.729ab, iLBC
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Lines quantity	10 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	16
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	2 A
AC adapter output voltage	5 V
Power over Ethernet (PoE)	-
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800
Volume control	Buttons

Weight and Dimensions

Depth	213 mm
Width	244 mm
Height	185 mm