User Guide for the SIP-T29G IP Phone
204
Press the Retrieve soft key to retrieve the call.
The conversation is established between phone B and phone C, phone A disconnects the call.
And the line key LEDs on phone A illuminate solid red and phone B illuminate solid green.
To retrieve a call placed on private hold:
The private held call can be only retrieved by the hold party (party A).
Do one of the following:
- Press the line key with the slowly flashing green LED indicator.
- Press the Resume soft key on phone A.
Barging In an Active Call
To interrupt the active call on the shared line:
If phone A has only one active call, do the following:
1. Long press the desired line key on phone B.
The Cancel, Call Pull, New Call and Barge In soft keys appear on the LCD screen of phone
B.
2. Press the Barge In soft key to interrupt the active call of phone A.
Party B will set up a conference call with the other parties in the active call.
3. Press , the Hold or the End Call soft key.
- If any party in the conference call presses or the Hold soft key, two-way voice
can be heard between the remaining parties.
- If party A or party B presses the End Call soft key, the remaining parties are still
connected. If the other party (not the shared line party) presses the End Call soft key,
the conference call is ended.
You can also press the line key with the solid red LED indicator on phone B to set up a
conference call with the other parties in the active call.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
