Yealink SIP-T33G Administrator's Guide

Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
239
Default
Blank
Parameter
custom_softkey_call_in.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom softkey layout file in the CallIn state.
Note: It works only if “phone_setting.custom_softkey_enable” is set to 1 (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Parameter
custom_softkey_connecting.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom softkey layout file in the Connecting state.
Note: It works only if “phone_setting.custom_softkey_enable” is set to 1 (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Parameter
custom_softkey_dialing.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom softkey layout file in the Dialing state.
Note: It works only if “phone_setting.custom_softkey_enable” is set to 1 (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Supported
Devices
All phones except T57W, T48U, T48S and T48G
Parameter
custom_softkey_ring_back.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom softkey layout file in the RingBack state.
Note: It works only if “phone_setting.custom_softkey_enable” is set to 1 (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Parameter
custom_softkey_talking.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom softkey layout file in the Talking state.
Note: It works only if “phone_setting.custom_softkey_enable” is set to 1 (Enabled).
Permitted
Values
URL within 511 characters
Default
Blank
Example: Setting the Soft Keys Layout in Talking State
The following example shows the configuration for setting the soft key layout in the talking state.
Customize a softkey layout file “Talking.xml” and place this file to the provisioning server “http://192.168.10.25”.
Example
phone_setting.custom_softkey_enable = 1
custom_softkey_talking.url = http://192.168.10.25/Talking.xml

Yealink SIP-T33G Specifications

General

Wall Mountable	Yes
Local Phonebook	1000 entries
Opus Codec	Yes
Lines	4
Supported Codecs	Opus, G.722, G.711(A/μ), G.729AB, G.726, iLBC
Headset Port	RJ9
Network	Dual-port Gigabit Ethernet
PoE	Yes (IEEE 802.3af)
Audio Features	HD voice
SIP Accounts	4
Buttons	4 context-sensitive soft keys
Headset Support	Yes
Supported Protocols	SIP
Operating Temperature	0 ~ 40°C
Humidity	10% to 90% (non-condensing)