Yealink SIP-T33G Administrator's Guide

Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
247
Default
2aB
Parameter
phone_setting.virtual_keyboard.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the phone to use the onscreen keyboard.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
T57W, T48U, T48S, T48G
Parameter
gui_onscreen_keyboard.url
[1]
<y0000000000xx>.cfg
Description
It configures the access URL of the custom onscreen keyboard input method file.
Permitted
Values
URL within 511 characters
Default
Blank
Supported
Devices
T57W, T48U, T48S, T48G
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Example: Configuring the French Onscreen Keyboard Input Method
The following example shows the configuration for configuring the French onscreen keyboard input method. The
onscreen keyboard input method is only applicable to T57W/T48U/T48S/T48G phones.
Customize the onscreen keyboard input method files “keyboard_lang.xml”, "keyboard_ime_francais.xml", "key-
board_ime_num.xml", "keyboard_layout_francais.xml", "keyboard_layout_2.xml" and place these files to the pro-
visioning server “http://192.168.10.25”.
Example
phone_setting.virtual_keyboard.enable = 1
gui_onscreen_keyboard.url = http://192.168.10.25/keyboard_lang.xml
gui_onscreen_keyboard.url = http://192.168.10.25/keyboard_ime_francais.xml
gui_onscreen_keyboard.url = http://192.168.10.25/keyboard_ime_num.xml
gui_onscreen_keyboard.url = http://192.168.10.25/keyboard_layout_francais.xml
gui_onscreen_keyboard.url = http://192.168.10.25/keyboard_layout_2.xml
After provisioning, you can use the French onscreen keyboard for entering information.

Yealink SIP-T33G Specifications

General

Wall Mountable	Yes
Local Phonebook	1000 entries
Opus Codec	Yes
Lines	4
Supported Codecs	Opus, G.722, G.711(A/μ), G.729AB, G.726, iLBC
Headset Port	RJ9
Network	Dual-port Gigabit Ethernet
PoE	Yes (IEEE 802.3af)
Audio Features	HD voice
SIP Accounts	4
Buttons	4 context-sensitive soft keys
Headset Support	Yes
Supported Protocols	SIP
Operating Temperature	0 ~ 40°C
Humidity	10% to 90% (non-condensing)