EasyManuals Logo

Yealink SIP-T33G Administrator's Guide

Yealink SIP-T33G
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #561 background imageLoading...
Page #561 background image
Troubleshooting Methods
557
NOTIFY sip:<user>@<dsthost> SIP/2.0
To: sip:<user>@<dsthost>
From: sip:sipsak@<srchost>
CSeq: 10 NOTIFY
Call-ID: 1234@<srchost>
Event: check-sync;reboot=true
Topic
Notify Reboot Configuration
Notify Reboot Configuration
The following table lists the parameter you can use to configure notify reboot.
Parameter
sip.notify_reboot_enable <y0000000000xx>.cfg
Description
It configures the IP phone behavior when receiving a SIP NOTIFY message which contains the
header “Event: check-sync”.
Permitted
Values
0-The phone will reboot only if the SIP NOTIFY message contains an additional string “reboot=true”.
1-The phone will reboot.
2-The phone will ignore the SIP NOTIFY message.
Default
1
Rebooting the Device via the Phone User Interface
You can reboot your device via the phone user interface.
Procedure
1. Press Menu > Basic > Reboot (Menu > Settings > Basic Settings > Reboot).
2. Press OK.
The device begins rebooting. Any reboot of the device may take a few minutes.
Rebooting the Device via Web User Interface
You can reboot your IP phone via the web user interface.
Procedure
1. Click Settings > Upgrade.
2. Click Reboot.
The device begins rebooting. Any reboot of the device may take a few minutes.

Table of Contents

Other manuals for Yealink SIP-T33G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T33G and is the answer not in the manual?

Yealink SIP-T33G Specifications

General IconGeneral
Wall MountableYes
Local Phonebook1000 entries
Opus CodecYes
Lines4
Supported CodecsOpus, G.722, G.711(A/μ), G.729AB, G.726, iLBC
Headset PortRJ9
NetworkDual-port Gigabit Ethernet
PoEYes (IEEE 802.3af)
Audio FeaturesHD voice
SIP Accounts4
Buttons4 context-sensitive soft keys
Headset SupportYes
Supported ProtocolsSIP
Operating Temperature0 ~ 40°C
Humidity10% to 90% (non-condensing)

Related product manuals