EasyManuals Logo

Yealink SIP-T33G Administrator's Guide

Yealink SIP-T33G
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #285 background imageLoading...
Page #285 background image
Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
281
Description
It configures the location on the phone screen for soft key X.
Note: It works only if “features.enhanced_dss_keys.enable” and “softkey.X.enable are set to 1
(Enabled).
Permitted
Values
Integer from 0 to 10
If it is set to 0, the soft key X is located in the first available position from the left.
If it is set to other values, a More soft key appears and the soft key X is located in the specified pos-
ition. The following soft keys are moved by one position to the right. Press the More soft key to view
the remaining soft keys.
Default
0
Parameter
softkey.X.action
[1]
<y0000000000xx>.cfg
Description
It configures the action or function for custom soft key X.
This value uses the same macro action string syntax as an Enhanced DSS key.
You can also invoke the EDK macro that was already defined. The macro name follows the character
“!”.
Example:
softkey.1.action = !macro1
In this example, macro1 stands for the macro name configured by the parameter “edk.edk-
list.X.mname”.
Note: It works only if “features.enhanced_dss_keys.enable” and “softkey.X.enable are set to 1
(Enabled).
Permitted
Values
String
Default
Blank
Parameter
softkey.X.softkey_id
[1]
<y0000000000xx>.cfg
Description
It configures the softkey id for custom soft key X.
Example:
softkey.1.softkey_id = custom_macro1
Note: It works only if “features.enhanced_dss_keys.enable” and “softkey.X.enable are set to 1
(Enabled).
Permitted
Values
String
Default
Blank
Parameter
softkey.X.use.idle
[1]
<y0000000000xx>.cfg
Description
It enables or disables the custom soft key X to be displayed in the idle state.
Note: It works only if “features.enhanced_dss_keys.enable” and “softkey.X.enable are set to 1
(Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
softkey.X.use.incoming_call
[1]
<y0000000000xx>.cfg
Description
It enables or disables the custom soft key X to be displayed in the alerting (ringing) state.

Table of Contents

Other manuals for Yealink SIP-T33G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T33G and is the answer not in the manual?

Yealink SIP-T33G Specifications

General IconGeneral
Wall MountableYes
Local Phonebook1000 entries
Opus CodecYes
Lines4
Supported CodecsOpus, G.722, G.711(A/μ), G.729AB, G.726, iLBC
Headset PortRJ9
NetworkDual-port Gigabit Ethernet
PoEYes (IEEE 802.3af)
Audio FeaturesHD voice
SIP Accounts4
Buttons4 context-sensitive soft keys
Headset SupportYes
Supported ProtocolsSIP
Operating Temperature0 ~ 40°C
Humidity10% to 90% (non-condensing)

Related product manuals