EasyManuals Logo

Yealink SIP-T33G Administrator's Guide

Yealink SIP-T33G
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #457 background imageLoading...
Page #457 background image
Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
453
Description
It enables or disables the custom configuration when the monitored user is talking.
Permitted
Values
0-Disabled
1-Enabled, the phone will display the custom BLF/BLF List DSS key LED status/icon colors and per-
form the custom behavior when pressing the BLF/BLF List DSS key.
Default
0
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920
Parameter
blf.enhanced.talking.led <y0000000000xx>.cfg
Description
It configures the custom BLF/BLF List DSS key LED status/icon colors when the monitored user is talk-
ing.
This value uses the same macro action string syntax as an Enhanced DSS key.
Example:
blf.enhanced.talking.led = $LEDg1000o$
For T57W/T48U/T48S/T48G phones, the BLF/BLF List DSS key field displays a green icon for 1000ms
and then turns to white.
For other phones, the BLF/BLF list DSS key LED glows green for 1000ms and then goes out.
Note: It works only if “blf.enhanced.talking.enable” is set to 1 (Enabled).
Permitted
Values
String
Default
Blank
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920
Parameter
blf.enhanced.talking.callin.action <y0000000000xx>.cfg
Description
It configures the behavior when pressing the BLF/BLF list DSS key if the monitor is ringing and mon-
itored user is talking.
Note: It works only if “blf.enhanced.talking.enable” is set to 1 (Enabled).
Permitted
Values
String
Default
Blank
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920
Parameter
blf.enhanced.talking.talking.action <y0000000000xx>.cfg
Description
It configures the behavior when pressing the BLF/BLF list DSS key if the monitor and monitored user
are talking.
Note: It works only if “blf.enhanced.talking.enable” is set to 1 (Enabled).
Permitted
Values
String
Default
Blank
Supported
Devices
All phones except T30P, T30, T19(P) E2 and CP920
Parameter
blf.enhanced.talking.idle.action <y0000000000xx>.cfg
Description
It configures the behavior when pressing the BLF/BLF list DSS key if the monitor is idle and monitored

Table of Contents

Other manuals for Yealink SIP-T33G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T33G and is the answer not in the manual?

Yealink SIP-T33G Specifications

General IconGeneral
Wall MountableYes
Local Phonebook1000 entries
Opus CodecYes
Lines4
Supported CodecsOpus, G.722, G.711(A/μ), G.729AB, G.726, iLBC
Headset PortRJ9
NetworkDual-port Gigabit Ethernet
PoEYes (IEEE 802.3af)
Audio FeaturesHD voice
SIP Accounts4
Buttons4 context-sensitive soft keys
Headset SupportYes
Supported ProtocolsSIP
Operating Temperature0 ~ 40°C
Humidity10% to 90% (non-condensing)

Related product manuals