Yealink SIP-T33G Administrator's Guide

Administrator’s Guide for SIP-T2 /T3 /T4 /T5 /CP920 IP Phones
85
Web UI
Settings > Auto Provision > Power On
Parameter
static.auto_provision.repeat.enable <y0000000000xx>.cfg
Description
It triggers the repeatedly feature to on or off.
Permitted
Values
0-Off
1-On
Default
0
Web UI
Settings > Auto Provision > Repeatedly
Parameter
static.auto_provision.repeat.minutes <y0000000000xx>.cfg
Description
It configures the interval (in minutes) for the phone to perform auto provisioning repeatedly.
Note: It works only if “static.auto_provision.repeat.enable” is set to 1 (On).
Permitted
Values
Integer from 1 to 43200
Default
1440
Web UI
Settings > Auto Provision > Interval(Minutes)
Parameter
static.auto_provision.weekly.enable <y0000000000xx>.cfg
Description
It triggers the weekly feature to on or off.
Permitted
Values
0-Off
1-On, the phone performs an auto provisioning process weekly.
Default
0
Web UI
Settings > Auto Provision > Weekly
Parameter
static.auto_provision.weekly_upgrade_interval <y0000000000xx>.cfg
Description
It configures the time interval (in weeks) for the phone to perform auto provisioning.
If it is set to 0, the phone performs auto provisioning at the specific day(s) configured by the parameter
“static.auto_provision.weekly.dayofweek” every week.
If it is set to other values (for example, 3), the phone performs auto provisioning at a random day
between the specific day(s) configured by the parameter “static.auto_provision.weekly.dayofweek”
every three weeks.
Note: It works only if “static.auto_provision.weekly.enable” is set to 1 (On).
Permitted
Values
Integer from 0 to 12
Default
0
Web UI
Settings > Auto Provision > Weekly Upgrade Interval(0~12week)
Parameter
static.auto_provision.inactivity_time_expire <y0000000000xx>.cfg
Description
It configures the delay time (in minutes) to perform auto provisioning when the phone is inactive at reg-
ular week.
If it is set to 0, the phone performs auto provisioning at random between a starting time configured by
the parameter “static.auto_provision.weekly.begin_time” and an ending time configured by the para-
meter “static.auto_provision.weekly.end_time”.
If it is set to other values (for example, 60), the phone performs auto provisioning only when it has

Yealink SIP-T33G Specifications

General

Wall Mountable	Yes
Local Phonebook	1000 entries
Opus Codec	Yes
Lines	4
Supported Codecs	Opus, G.722, G.711(A/μ), G.729AB, G.726, iLBC
Headset Port	RJ9
Network	Dual-port Gigabit Ethernet
PoE	Yes (IEEE 802.3af)
Audio Features	HD voice
SIP Accounts	4
Buttons	4 context-sensitive soft keys
Headset Support	Yes
Supported Protocols	SIP
Operating Temperature	0 ~ 40°C
Humidity	10% to 90% (non-condensing)