EasyManua.ls Logo

Yealink SIP-T40G

Yealink SIP-T40G
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BROADSOFT PARTNER CONFIGURATION GUIDE YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 134 OF 150
###T19E2/T21E2/T23E2/T61/T66/T40/T27P/T41/T42/T46/T29/T48/T27G/T41S/T42S/T
46S/T48S support pcmu/pcma/g729/g722/ilbc/g726_16/g726_24/g726_32/g726_40
###T19E2/T21E2/T23E2/T40/T27G/T41S/T42S/T46S/T48S support opus
###T19E2/T21E2/T23E2/T61/T66/T40/T41/T42/T46/T29/T48/T41S/T42S/T46S/T48S
support g723_53/g723_63
account.3.codec.g722.enable =
account.3.codec.g722.priority =
account.3.codec.g729.enable =
account.3.codec.g729.priority =
account.3.codec.g723_53.enable =
account.3.codec.g723_53.priority =
account.3.codec.g723_63.enable =
account.3.codec.g723_63.priority =
account.3.codec.g726_16.enable =
account.3.codec.g726_16.priority =
account.3.codec.g726_16.rtpmap =
account.3.codec.g726_24.enable =
account.3.codec.g726_24.priority =
account.3.codec.g726_24.rtpmap =
account.3.codec.g726_32.enable =
account.3.codec.g726_32.priority =
account.3.codec.g726_32.rtpmap =
account.3.codec.g726_40.enable =
account.3.codec.g726_40.priority =
account.3.codec.g726_40.rtpmap =
account.3.codec.ilbc.enable =
account.3.codec.ilbc.priority =
account.3.codec.ilbc.rtpmap =
account.3.codec.opus.enable =
account.3.codec.opus.priority =
account.3.codec.opus.rtpmap =
account.3.codec.pcmu.enable =
account.3.codec.pcmu.priority =
account.3.codec.pcma.enable =
account.3.codec.pcma.priority =
##########################################################################
#############
## Audio Advanced
##
##########################################################################
#############
##It configures whether to use voice encryption service for account X.0-
Disabled,1-Optional,2-Compulsory.
##The default value is 0.
account.3.srtp_encryption =
##It configures the RTP packet time for account X.0 (Disabled), 10, 20,
30, 40, 50 or 60.
##The default value is 20.
account.3.ptime =
## The default value is 0(Take a SRTP all encryption).1:Only carry AES -
80 secret key,2: Only carry AES - 32 secret key
##########################################################################
#############
## Anonymous Call
##
##########################################################################
#############
account.3.send_anonymous_code =

Table of Contents

Other manuals for Yealink SIP-T40G

Related product manuals