Yealink SIP-T40G

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 138 OF 150
account.3.acd.available =
account.3.acd.initial_state =
##########################################################################
#############
## Broadsoft ACD Call Center
##
##########################################################################
#############
account.3.reason_code.1 =
account.3.reason_code_name.1 =
account.3.bw_disp_code.1 =
account.3.bw_disp_code_name.1 =
account.3.supervisor_info_code.1 =
account.3.supervisor_info_code_name.1 =
##########################################################################
#############
## Broadsoft Call Center
##
##########################################################################
#############
account.3.call_center.call_info_enable =
account.3.call_center.show_call_info_time =
account.3.call_center.disp_code_enable =
account.3.call_center.trace_enable =
account.3.call_center.emergency_enable =
account.3.call_center.queue_status_enable =
account.3.call_center.queue_status_light_enable =
##########################################################################
#############
## Broadsoft XSI ##
##########################################################################
#############
##It configures the user name for XSI authentication for account
X.Example:account.3.xsi.user = 3502@as.iop1.broadworks.net.
##The default value is blank.
account.3.xsi.user = %BWLOGIN-ID-3%
##It configures the password for XSI authentication for account
X.Example:account.3.xsi.password = 123456.
##The default value is blank.
account.3.xsi.password = %XSIPASSWORD-3%
##It configures the access URL of the Xtended Services Platform server for
account X.Example:account.3.xsi.host = xsp1.iop1.broadworks.net.
##The default value is blank.
account.3.xsi.host = %XSP_ADDRESS%
##It configures the server type of the Xtended Services Platform server
for account X.Example:account.3.xsi.server_type = http.
##The default value is http.
account.3.xsi.server_type =
##It configures the server port of the Xtended Services Platform server
for account X.Example:account.3.xsi.port = 80.
##The default value is 80.Integer from 1 to 65535
account.3.xsi.port =