Yealink SIP-T40G

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 139 OF 150
##########################################################################
#############
## V80 Add
##
##########################################################################
#############
## Add Time 2015.6.26
account.3.callerid_in_support_header.enable =
account.3.acd.auto_login_enable =
account.3.outbound_proxy_fallback_interval =
account.3.transfer_refer_to_contact_header.enable =
account.3.sub_fail_retry_interval =
account.3.update_ack_while_dialing =
account.3.end_call_when_transferred.enable =
account.3.nat.stun_refresh_timer =
account.3.contact_take_line_param.enable =
##########################################################################
#############
## V80-SP2 Add
##
##########################################################################
#############
account.3.acd.call_information =
account.3.acd.refresh_url =
account.3.acd.away_url =
account.3.acd.available_url =
account.3.bla.notify_with_expire.enable =
account.3.bla.subscribe_uri_build_type =
account.3.instance_id.enable =
##########################################################################
#############
## V81-Alpha Add
##
##########################################################################
#############
account.3.phone_setting.call_appearance.calls_per_linekey =
account.3.phone_setting.call_appearance.transfer_via_new_linekey =
account.3.phone_setting.call_appearance.conference_via_new_linekey =
account.3.sip_server.1.invite_retry_counts =
account.3.sip_server.1.only_signal_with_registered =
account.3.reg_failed_retry_min_time =
account.3.reg_failed_retry_max_time =
account.3.line_seize.expires =
account.3.gruu.enable =
account.3.sip_server.1.failback_subscribe.enable =
account.3.hold_use_inactive =
account.3.features.usb_call_recording.enable =
##########################################################################
#############
## V81-Beta Add
##
##########################################################################
#############
account.3.security_classification.enable =
account.3.srtp_lifetime =
account.3.xsi.custom_url =
account.3.dialplan.digitmap.active.on_hook_dialing =
account.3.dialplan.digitmap.apply_to.directory_dial =