Yealink SIP-T40G

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 140 OF 150
account.3.dialplan.digitmap.apply_to.forward =
account.3.dialplan.digitmap.apply_to.on_hook_dial =
account.3.dialplan.digitmap.apply_to.press_send =
account.3.dialplan.digitmap.enable =
account.3.dialplan.digitmap.interdigit_long_timer =
account.3.dialplan.digitmap.interdigit_short_timer =
account.3.dialplan.digitmap.no_match_action =
account.3.dialplan.digitmap.string =
account.3.hoteling.mode =
account.3.hoteling.pin =
account.3.flexible_seating.enable =
##########################################################################
#############
## V81-Beta SP1 Add
##
##########################################################################
#############
account.3.features.call_decline.enable =
account.3.call_recording.enable =
account.3.hoteling.expires =
##########################################################################
#############
## Broadsoft Setting
##
##########################################################################
#############
bw.enable = %FEATURY_BW_DIR%
bw.enable =1
###It enables or disables feature key synchronization.
###0-Disabled,1-Enabled.
###The default value is 1.
bw.feature_key_sync = %FEATURE_SYNC%
##########################################################################
#############
## Broadsoft Phonebook(Except T20P
model) ##
##########################################################################
#############
###It enables or disables the phone to display the group directory.
###0-Disabled,1-Enabled.
###The default value is 1.
bw_phonebook.group_enable = 1
###It enables or disables the phone to display the personal directory.
###0-Disabled,1-Enabled.
###The default value is 1.
bw_phonebook.personal_enable = 1
###It enables or disables the phone to display the group common directory.
###0-Disabled,1-Enabled.
###The default value is 1.
bw_phonebook.group_common_enable = 1
###It enables or disables the phone to display the enterprise directory.
###0-Disabled,1-Enabled.
###The default value is 1.
bw_phonebook.enterprise_enable = 1