Yealink SIP-T41P Configuration Guide

Yealink IP Phones Configuring Guide
8
To trigger auto provisioning via powered on:
1. After powered on, the LCD screen will be displayed as below:
2. Press the Login soft key to enter the Auto Provision screen.
3. Enter the user name (e.g., 9702981673) and account password in the User name
and Password field respectively.
4. Press the OK soft key.
The phone will reboot. During reboot, the phone will send the username and the
password to the server for authentication. If successful, the phone will complete
deployment after reboot. Then you can access the features you configured on the
CommPortal phone configurator via your phone.
Note
You can use Auto Provision Now method to trigger the IP phone to perform the auto
provisioning immediately. Before performing the auto provisioning, you need to enter
the provisioning server address manually.
To trigger auto provisioning via auto provision now:
1. Press Menu->Settings->Advanced Settings->Auto Provision.
2. Enter the provisioning server address (e.g., http:// example.com /sip-ps/) in the
Server URL field.
3. Press the Save soft key.
The LCD screen will be displayed as below:
4. Press the Ok soft key.
Long press can reboot the phone. This will also trigger the phone to perform auto
provisioning.

Yealink SIP-T41P Specifications

General

Power requirements	AC 100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.726, G.729A, G.729B
Bluetooth	No
Ethernet LAN (RJ-45) ports	2
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm