Yealink SIP-T41P Configuration Guide

Customizing Your Phone
13
5. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning, refer to Downloading
Configuration Files on page 7.
Note
You can register one or multiple accounts on the SIP IP phone. You can also configure
each line key to associate with an account or configure multiple line keys to associate
with an account.
To register an account via CommPortal phone configurator:
1. Click on Line X->User.
2. Enter the desired values in Directory Number and Display Name fields respectively.
3. Select the desired value from the Description field.
4. Depending on your selection:
- If you select Use directory number, the directory number will act as the
account label to be displayed on the idle screen.
- If you select Use extension, the extension will act as the account label to be
displayed on the idle screen.
- If you select Custom description, you can customize the label to be displayed
on the idle screen in the Custom Description field.
5. Click on Line X->SIP Server.
Wrong network settings may result in inaccessibility of your phone and may also have an
impact on your network performance. For more information on these parameters,
contact your system administrator.

Yealink SIP-T41P Specifications

General

Power requirements	AC 100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.726, G.729A, G.729B
Bluetooth	No
Ethernet LAN (RJ-45) ports	2
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm