Yealink SIP-T41P Configuration Guide

Using Your Phone
55
5. Enter the string that will appear on the LCD screen in the Label field.
6. Click Save changes to accept the change.
7. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning, refer to Downloading
Configuration Files on page 7.
When the monitored line (e.g., 9702981675) receives an incoming call, the enhanced
monitor extension key LED on your phone flashes red.
When there is an active call on your phone, you can transfer the active call to the
monitored phone number directly by pressing the enhanced monitor extension key. The
phone handles the active call differently depending on the transfer mode via DSS key.
To configure Transfer Mode via Dsskey feature via CommPortal phone configurator:
1. Click on Features->Transfer.
2. Select the desired type from the Transfer Mode via Dsskey field.
3. Depending on your selection:
- If you select Blind Transfer, press the enhanced monitor extension key to
complete the blind transfer to the monitored number.
- If you select Attended Transfer, press the enhanced monitor extension key to
dial out the monitored number, and then perform the attended or
semi-attended transfer.
- If you select New Call, press the enhanced monitor extension key to place a
new call to the monitored number.
4. Click Save changes to accept the change.
5. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning, refer to Downloading

Yealink SIP-T41P Specifications

General

Power requirements	AC 100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.726, G.729A, G.729B
Bluetooth	No
Ethernet LAN (RJ-45) ports	2
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm