Yealink SIP-T41S - Programmable Keys Customization

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 114 OF 150
account.1.srtp_encryption =
##It configures the RTP packet time for account X.0 (Disabled), 10, 20,
30, 40, 50 or 60.
##The default value is 20.
account.1.ptime =
## The default value is 0(Take a SRTP all encryption).1:Only carry AES -
80 secret key,2: Only carry AES - 32 secret key
##########################################################################
#############
## Anonymous Call
##
##########################################################################
#############
account.1.send_anonymous_code =
account.1.anonymous_call =
account.1.anonymous_call_oncode =
account.1.anonymous_call_offcode =
account.1.reject_anonymous_call = %REJECT_ANONYMOUS_CALL_BINARY%
account.1.anonymous_reject_oncode =
account.1.anonymous_reject_offcode =
account.1.send_anonymous_rejection_code =
##########################################################################
#############
## Pickup Code
##
##########################################################################
#############
##It enables or disables the phone to pick up a call according to the SIP
header of dialog-info for account X.0-Disabled,1-Enabled.
##The default value is 0.
account.1.dialoginfo_callpickup =
##It configures the group pickup code for account X.
##The default value is blank.
account.1.group_pickup_code = %BWFAC-CALL-PICKUP-1%
##It configures the directed pickup code for account X.
##The default value is blank.
account.1.direct_pickup_code = %BWFAC-DIRECTED-CALL-PICKUP-1%
##########################################################################
#############
## DTMF
##
##########################################################################
#############
account.1.dtmf.type =
account.1.dtmf.info_type =
account.1.dtmf.dtmf_payload =
##########################################################################
#############
## Alert info
##
##########################################################################
#############
##It enables or disables the distinctive ringtones by the Alert-Info SIP
header for account X.0-Disabled,1-Enabled.
##The default value is 0.