BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK T4X IP PHONE 20-BD5476-00
©
2017 BROADSOFT INC. PAGE 115 OF 150
account.1.alert_info_url_enable =
##Except T19P/T21P Models
##The default value is blank.Values range 256 characters in length
account.1.alert_info =
account.1.ringtone.ring_type =
###Only for T46G Model
##It enables or disables the phone to download the picture information for
account X when receiving an incoming call or during a call.0-Disabled,1-
Enabled.
##The default value is 0.
account.1.picture_info_enable =
##########################################################################
#############
## Conference
##
##########################################################################
#############
##It configures the conference type for account X.0-Local Conference,2-
Network Conference.
##The default value is 0.
account.1.conf_type =
##It configures the network conference URI for account X.
##The default value is blank.
account.1.conf_uri = %BWNETWORK-CONFERENCE-SIPURI-1%
##########################################################################
#############
## CID Source
##
##########################################################################
#############
account.1.cid_source =
account.1.cid_source_privacy =
account.1.cid_source_ppi =
account.1.cp_source =
##########################################################################
#############
## Session Timer
##
##########################################################################
#############
account.1.session_timer.enable =
account.1.session_timer.expires =
account.1.session_timer.refresher =
##########################################################################
#############
## Music on Hold
##
##########################################################################
#############
##It configures the way on how the phone processes Music On Hold when
placing an active call on hold for account X.
##0-Calling the music server before holding
##1-Calling the music server after holding
##The default value is 0.
account.1.music_on_hold_type =
To Next Page
Loading...
