EasyManuals Logo

Yealink SIP-T4U Series User Manual

Yealink SIP-T4U Series
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #191 background imageLoading...
Page #191 background image
Audio Features
188
Parameter
phone_setting.vq_rtcpxr_display_remote_call_id.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display Remote User on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Settings > Voice Monitoring > Report Options on Phone > Remote User
Parameter
phone_setting.vq_rtcpxr_display_local_codec.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display Local Codec on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Settings > Voice Monitoring > Report Options on Phone > Local Codec
Parameter
phone_setting.vq_rtcpxr_display_remote_codec.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display Remote Codec on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Settings > Voice Monitoring > Report Options on Phone > Remote Codec
Parameter
phone_setting.vq_rtcpxr_display_jitter.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display Jitter on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Settings > Voice Monitoring > Report Options on Phone > Jitter
Parameter
phone_setting.vq_rtcpxr_display_jitter_buffer_max.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display Jitter Buffer Max on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Settings > Voice Monitoring > Report Options on Phone > Jitter Buffer Max
Parameter
phone_setting.vq_rtcpxr_display_packets_lost.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display Packets lost on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable is set to 1 (Enabled).
Permitted
0-Disabled

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T4U Series and is the answer not in the manual?

Yealink SIP-T4U Series Specifications

General IconGeneral
BrandYealink
ModelSIP-T4U Series
CategoryIP Phone
LanguageEnglish

Related product manuals