Yealink SIP-T4U Series

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
87
1-On, the phone performs auto provisioning at random between a starting time configured by the para-
meter "static.auto_provision.flexible.begin_time" and an ending time configured by the parameter "stat-
ic.auto_provision.flexible.end_time" on a random day within the period configured by the parameter
"static.auto_provision.flexible.interval".
Default
0
Web UI
Settings > Auto Provision > Flexible Auto Provision
Parameter
static.auto_provision.flexible.interval <y0000000000xx>.cfg
Description
It configures the interval (in days) for the phone to perform auto provisioning.
The auto provisioning occurs on a random day within this period based on the phone's MAC address.
The phone performs auto provisioning on a random day (for example, 18) based on the phone's MAC
address.
Note: It works only if “static.auto_provision.flexible.enable” is set to 1 (On).
Permitted
Values
Integer from 1 to 1000
Default
30
Web UI
Settings > Auto Provision > Flexible Interval Days
Parameter
static.auto_provision.flexible.begin_time <y0000000000xx>.cfg
Description
It configures the starting time of the day for the phone to perform auto provisioning at random.
Note: It works only if “static.auto_provision.flexible.enable” is set to 1 (On).
Permitted
Values
Time from 00:00 to 23:59
Default
02:00
Web UI
Settings > Auto Provision > Flexible Time
Parameter
static.auto_provision.flexible.end_time <y0000000000xx>.cfg
Description
It configures the ending time of the day for the phone to perform auto provisioning at random.
If it is left blank or set to a specific value equal to starting time configured by the parameter “stat-
ic.auto_provision.weekly.begin_time”, the phone performs auto provisioning at the starting time.
If it is set to a specific value greater than starting time configured by the parameter “static.auto_pro-
vision.weekly.begin_time”, the phone performs auto provisioning at random between the starting time
and ending time.
If it is set to a specific value less than starting time configured by the parameter “static.auto_pro-
vision.weekly.begin_time”, the phone performs auto provisioning at random between the starting time
on that day and ending time in the next day.
Note: It works only if “static.auto_provision.flexible.enable” is set to 1 (On).
Permitted
Values
Time from 00:00 to 23:59
Default
Blank
Web UI
Settings > Auto Provision > Flexible Time
Parameter
static.auto_provision.prompt.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to prompt you for the configuration update and the result (if any con-
figuration changes) during auto provisioning.