Yealink SIP VP-T49G - Page 45

Yealink IP Phone XML Objects
35
SoftKey Index
Label
URI
6
Exit
SoftKey:Exit
For SIP-T48G IP phones:
SoftKey Index
Label
URI
1
2aB
SoftKey:ChangeMode
2
BackSpace
SoftKey:BackSpace
3
Dot (.)
SoftKey:Dot
4
NextSpace
SoftKey:NextSpace
5
Submit
SoftKey:Submit
For SIP VP-T49G IP phones:
SoftKey Index
Label
URI
1
Submit
SoftKey:Submit
The function keys and soft keys are listed in the following table:
Key Name
Operation
Function
Up/Down
Key
Pressing the
up/down key
Browse the input box up and down.
Note: Pressing the up/down key is not
applicable to SIP VP-T49G IP phones.
Left/Right
Key
Pressing the
left/right key
Move the cursor left and right.
Note: Pressing the left/right key is not
applicable to SIP VP-T49G/CP860 IP phones.
Keypad
Pressing the digit
keys 1~9, * and #
keys
If the value of the LockIn is “no” and the
value of the “editable” is "yes", then input
character; otherwise no response.
BackSpace
Pressing the
BackSpace soft key
Delete the character before the cursor in the
input box.
Dot (.)
Pressing the Dot soft
key
Input a “.” in the input box at the cursor
position.
Submit
Pressing the Submit
soft key
Execute the command comprised of the URI
and input content.
Exit
Pressing the Exit soft
key
Tapping (only
for SIP
Exit from the current XML screen.