Yealink SIP VP-T49G Developer's Guide

XML Browser Developer’s Guide for Yealink IP Phones
36
Key Name
Operation
Function
VP-T49G/SIP-T48G IP
phones)
Pressing the
on-hook key (only
applicable to CP860
IP phones)
2aB
Pressing the 2aB
soft key
Input mode switch, e.g., switch the input
mode among “2aB”, “ABC”, “abc” or “123”.
Note: Pressing the 2aB soft key is not
applicable to SIP VP-T49G IP phones.
NextSpace
Pressing the
NextSpace soft key
Input a space in the input box at the cursor
position.
Off-hook/Lin
e
Key/Speake
rphone Key/
Off-hook
Key
Off hook
Pressing the line
key/Speakerphone
Key/ Off-hook key
If the value of the LockIn is “no”, the phone
will enter the pre-dialing screen.
If the value of the LockIn is “yes”, the phone
will be no response to any operation.
Note: Pressing the line key is not applicable
to SIP-T19(P) E2/CP860 IP phones. Pressing the
off-hook key is only applicable to CP860 IP
phones. Off hook is not applicable to CP860
IP phones.
Cancel Key
Pressing the “X” key
If “cancelAction” is not left blank, the function
of “X” key is calling the URI defined by
“cancelAction”.
If “cancelAction” is left blank, the function of
“X” key is returning to the idle screen.
Note: Pressing the “X” key is not applicable
to SIP VP-T49G/SIP-T19(P) E2/CP860 IP phones.
OK/√ Key
Pressing the “OK/√”
key
The function of “OK/√” key is the same as
that of “Submit”.
Note: Pressing the “OK/√” key is not
applicable to SIP VP-T49G IP phones.
An example of the InputScreen object:
<?xml version="1.0" encoding="ISO-8859-1"?>
<YealinkIPPhoneInputScreen
type="string"
Beep="yes"

Yealink SIP VP-T49G Specifications

General

Brand	Yealink
Model	SIP VP-T49G
Category	IP Phone
Language	English