Show the function key's serial number
Memory Key: settings can be stored in key storage
for each number, the standby or off-hook, select
the function keys on the keyboard can call this
number.
Line, set the dial mode (Auto, SIP1, SIP2, SIP3,
SIP4, IAX2).Key Key Event functions, monitor
state.
DTMF：In the call, send DTMF
URL: You can input remote book url
Set the type parameter values.
Choose which lines to use this feature.
Select the function parameters Key Event and
Memory Event.
The value of SubType is the number to BLF or
Presence.
NOTICE：
memory keys can be configured through the following:
Speed Dial function, through the configuration of the key corresponding to
the number of ways as shown below.
User can press the F1 key to allocate this number by line1 line.
Intercom function, you can press this key in standby to automatically
answer the call and make each other.
User can be configured in accordance with push to talk function the way:
4116 was the other number; Then press the standby button and make it
automatically answer the call 4116.
key can be configured through the following events:
For example:
To Next Page
Loading...
Need help?
General
