Yealink T26 User Manual

3) If you set 0 for the HTTP port, it will disable HTTP service.
DHCP SERVER
DHCP SERVER
Field name
explanation
DHCP Lease Table
IP-MAC mapping table. If the LAN port of the phone
connects to a device, this table will show the IP and
MAC address of this device.
Shows the DHCP Lease Table， the unit of Lease time is Minute.
Leased Table Name
Specify the name of the lease table
Start IP Address
Set the start IP address of the lease table
End IP Address
Set the end IP address of the lease table, the network
device connected to LAN port will get IP address
between Start IP and End IP by DHCP.
Subnet Mask
Set the Netmask of the lease table
IP Gateway
Set the Gateway of the lease table
Leased Time
Set the Lease Time of the lease table
DNS Server
Address
Set the default DNS server IP of the lease table; Click
the Add button to submit and add this lease table

Yealink T26 Specifications

General

Brand	Yealink
Model	T26
Category	IP Phone
Language	English