Yealink T26 User Manual

DSP Configuration
Field name
explanation
First Codec
The first preferential DSP
codec:G.711A/U,G.722,G.723,G.729,G.726-32
Second Codec
The second preferential DSP codec:
G.711A/U,G.722,G.723,G.729,G.726-32,NONE
Third Codec
The third preferential DSP codec:
G.711A/U,G.722,G.723,G.729,G.726-32 ,NONE
Fourth Codec
The forth preferential DSP codec:
G.711A/U,G.722,G.723,G.729,G.726-32 ,NONE
Fifth Codec
The fifth preferential DSP codec:
G.711A/U,G.722,G.723,G.729,G.726-32,NONE
Sixth codec
The sixth preferential DSP codec:
G.711A/U,G.722,G.723,G.729,G.726-32,NONE
Handset Input
Volume
Specify Input (MIC) Volume grade.；
G729AB Payload
Length
Set G729 Payload Length
Onhook Time
Specify the least reflection time of Hand down, the
default is 200ms.
Default Ring Type
Select Ring Type
Handset Output
Volume
Specify Output (receiver) Volume grade.
Speakerphone
volume
Specify Speakerphone Volume grade.
Ring Volume
Specify Ring Volume grade
G722 Timestamps
160/20ms or 320/20ms is available
G723.1 Bit Rate
5.3kb/s or 6.3kb/s is available
Default Ring Type
Set up the ring by default
Tone Standard
Select Tone Standard.
EnableVAD
Select it or not to enable or disable VAD. If enable
VAD, G729 Payload length could not be set over

Yealink T26 Specifications

General

Brand	Yealink
Model	T26
Category	IP Phone
Language	English