Yealink T26 User Manual

Supports PnP and DHCP and Phone Flash to obtain the parameters. The PnP
and DHCP and Phone Flash are all deployed, endpoint will go by the following
process to try to obtain the server address and other parameters, when it boots
up:
DHCP option  
Auto Provision
Field name
explanation
Auto Update
Setting
Current Config
Version
Show the current config file‟s version. If the version
of the configuration downloaded is higher than the
version of the running configurations, the auto
provision would upgrade, or stop here. If the endpoints
confirm the configuration by Digest method, the
endpoints wouldn‟t upgrade configuration unless the
configuration in the server is different with the
running configuration.
Common Config
Version
Show the common config file‟s version. If the
configuration downloaded and the running
configurations are the same, the auto provision would
stop here. If the endpoints confirm the configuration
by Digest method, the endpoints wouldn‟t upgrade
configuration unless the configuration in the server is
different with the running configuration.
CPE Serial Number
Show CPE Serial Number
User
Specify FTP/HTTP/HTTPS server Username. System
will use anonymous if username keep blank.
Password
Specify FTP/HTTP/HTTPS server Password.

Yealink T26 Specifications

General

Brand	Yealink
Model	T26
Category	IP Phone
Language	English