Yealink T42G Manual

Yealink T42G
Operating Instructions
1. If the WAN (wide area network) connection fails to a site for any reason, including a fault on the circuit
or a power cut, then the ability to make and receive calls from the IP phones utilising that WAN circuit
will be restricted. These failures may be caused for reasons outside our control. Other services will be
fully maintained including voice mail and the ability to divert calls to other numbers including mobiles.
If another working WAN circuit is available at that site then this can be used to fully restore service to
all phones.
2. This service allows for calls to 999 and 112, however these services will be aected if there is a power
cut or your WAN circuit fails
3. With regard 999 services no location information is passed to the emergency services operator this will
mean that you will have to state the address that you wish the emergency service to attend.
4. We do not oer a paper based telephone directory service
5. If you require a PDF that allows you to print o stickers to attach to the phone device explaining the
above please contact us.
Poplar House, Park West, Chester, CH1 4RN
T: 033 000 22 000 F: 033 000 22 039 W: www.pescado.co.uk

Yealink T42G Specifications

General

Power requirements	100-240V, DC 5V
Power over Ethernet (PoE)	Yes
Touchscreen	-
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Voice codecs	G.711, G.723, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black, Grey
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	189 mm