Yealink T48G User Manual

Yealink T48G
Your Customers. Your Success. Our Platform.
www.vanillaip.com 0800 9700971
vanillaIP
Making a Call
Pick up the Handset to make a call.
• Dial Number Directly : Dial the number direct-
ly, and press the # key to call out
• Re-dial: Dial the RD Button to dial out the last
called number directly
Answering a Call
Answering an incoming call in the following ways:
• If you are on another call, press the Hold key
to answer it
• If you are not on another call, just lift the hand-
set to answer it
• You can also press the Mute button to deny the
incoming call
Muting a Call
Press the Mute button during a conversation to
mute the call, and press it again to get the micro-
phone to return to normal conversation
Volume Adjustment
During the call, you can press the volume adjust-
ment bars to adjust the volume
Putting a Call on Hold
Press the HOLD button to put your active call on
hold
• If there is only one call on hold, press the HOLD
key again to retrieve it
• If there are two calls on hold, press HOLD to
put the current call on hold, and retrieve the
third party
Voice Mail
The Presence of new Voice Mail messages will be
indicated by the LED, users can pick up the handset
and dial the concatenated code to get the voice-
mail in the server
Conference Call
Press the Hold key during an active call
• The first call is placed on hold. You can dial the
third number, then press # key to call out.
• When the call is answered, press the Redial key
to establish a three-party conference.
• Hang up to disconnect the conference call
Call Transfer
There are three ways to transfer the call: Blind Trans-
fer, Attended Transfer and Semi- Attend Transfer.
Blind Transfer:
• Press TRAN to put the caller on hold
• Dial the destination extension
• Press TRAN
• Replace receiver
Announced Transfer:
• Press TRAN to put the caller on hold
• Dial the destination extension and press #
• Announce the call to the receiving party and
then either press TRAN or replace the receiver
• Call will be transfered
Semi – Announced Transfer:
• Press TRAN to put the caller on hold
• Dial the destination extension and press #
• When you hear the ringing tone, hang up or
press the TRAN button to complete the trans-
fer.

Yealink T48G Specifications

General

Wi-Fi	No
Display	7" 800 x 480-pixel color touch screen
Network	Dual-port Gigabit Ethernet
PoE	Yes (IEEE 802.3af)
Audio Features	HD voice: HD handset, HD speaker
Voice Codecs	G.722, G.711(A/μ), G.729AB, G.726
Network Features	SIP v1 (RFC2543), v2 (RFC3261)
Bluetooth	Bluetooth via USB Dongle
USB	1 x USB 2.0
Headset	Yes (EHS support)
Expansion Module	Supports up to 6 modules
Local Phonebook	1000 entries
Power Supply	AC 100~240V input, DC 5V/2A output
Supported Languages	English, French, German, Italian, Polish, Portuguese, Russian, Spanish
Operating Temperature	0 ~ 40°C (+32 ~ 104°F)
Humidity	10% to 95%, non-condensing
Dimensions	266 x 226 x 185 mm