Configure Port Mapping
If the VC110 is deployed in an Intranet, and you want to solve the interconnection problem by port mapping, you must
forward the following ports to the public network on the firewall.
.
Press Save to save the configuration,
.
The screen prompts Reboot now
. Press
OK
to reboot the
endpoint
.
PortFunction
H.323 signal port
SIP（ optional ）
Audio & Video media stream port
Web management port（ optional ）
Protocol Type
UDP/TCP
5060
443
50000-50499
1719-1720
TCP/UDP
TCP/UDP
TCP
Enter the IP address, subnet mask, gateway and DNS information in corresponding fields.
.
11
To Next Page
Loading...
